Platform Comparison
Full-Spectrum AI Security vs. Gun-Only Detection.
Omnilert detects firearms. Period. IntelliSee detects firearms, falls, unauthorized access, crowds, loitering, vehicles, slip hazards, smoke, cell phones, and perimeter breaches — all from the same cameras, at one price, with automated alerts that never wait for human verification.
The Core Difference
A Notification Company with Gun Detection vs. a Purpose-Built AI Security Platform
Omnilert was founded in 2004 as an emergency mass notification system. Twenty years later, they added AI gun detection as a product extension. Their core competency is sending alerts, not analyzing visual data. IntelliSee was engineered from the ground up as a multi-threat computer vision platform.
Omnilert
Notification Platform + Gun Detection Add-On
Mass Notification Company Since 2004
- Firearms only — no other threat types
- Human operations center review required before every alert
- Connects to existing IP cameras
- Founded 2004 as mass notification company
- DHS SAFETY Act Designated (March 2025)
- Separate purchase for each additional capability
- Native mass notification built in
IntelliSee
Purpose-Built Multi-Threat AI Platform
Engineered for Comprehensive Threat Detection
- 11+ threat types from one platform
- Automated multi-frame AI validation — no human bottleneck
- Connects to existing ONVIF / RTSP cameras
- Purpose-built computer vision platform from day one
- DHS QATT designated + NSCA EPI Award
- New detections added at no extra cost
- 100% on-premises — video never leaves your network
Weapons Falls Access Crowds Fire Vehicles Loitering Slip Risk Perimeter
Capability Matrix
Side-by-Side: Every Capability Compared
When you evaluate AI security platforms on total threat coverage — not just firearm detection in isolation — the coverage gap becomes undeniable.
| Capability | IntelliSee | Omnilert |
|---|---|---|
| Detection Capabilities | ||
| Gun / Weapon Detection | Yes | Yes |
| Fall Detection | Yes | No |
| Unauthorized Access / Trespass | Yes | No |
| Slip-Risk / Floor Hazard | Yes | No |
| Loitering Detection | Yes | No |
| Crowd Detection | Yes | No |
| Vehicle Detection | Yes | No |
| Smoke & Fire Detection | Yes | No |
| Cell Phone Detection | Yes | No |
| Perimeter / Rooftop Intrusion | Yes | No |
| Platform & Architecture | ||
| Works with Existing Cameras | Yes — ONVIF / RTSP | Yes — IP Cameras |
| On-Premise Appliance | 1U rack-mounted edge appliance | Gun Detect appliance |
| Alert Method | Automated multi-frame AI | Human operations center verification |
| No Facial Recognition | Yes | Yes |
| DHS Recognition | DHS QATT Designation | DHS SAFETY Act Designation (March 2025) |
| Mass Notification | Integrates with Singlewire + AtlasIED | Native platform (founded as notification company) |
| New Detections at No Extra Cost | Yes | No — gun-only platform |
| VMS Integration | Milestone, Genetec, Avigilon, Exacq, video management | video management, various VMS |
| Total Cost of Protection | ||
| Systems for Full Coverage | 1 | Multiple vendors required |
| Contracts to Manage | 1 | 1 per threat type |
| Dashboards to Monitor | 1 | 1 per vendor |
Alert Architecture
The Human Verification Bottleneck
Omnilert routes every single detection through a human operator who must visually confirm the threat before any alert reaches your team. IntelliSee delivers every detection directly to your security team in seconds — and gun detections are simultaneously routed to RapidSOS for professional verification.
Omnilert Alert Path
- 1 Camera captures firearm (single threat type)
- 2 Appliance identifies potential gun threat
- 3 Alert routed to human operations center
- 4 Trained operator manually reviews and confirms
- 5 Alert finally sent to your security team
Total: AI Detection + Human Review Latency. Every alert depends on third-party operator availability and confirmation speed.
IntelliSee Alert Path
- 1 Camera captures threat (weapon, fall, unauthorized access, or any of 11+ types)
- 2 1U edge appliance runs multi-frame AI validation on-premises
- 3 Alert delivered directly to your security team within seconds
- 4 Gun detections simultaneously verified by RapidSOS
Your team is alerted in seconds — every detection, every time. Gun alerts also route to RapidSOS for professional verification. All other detections go direct.
Industry Impact
What Omnilert Misses in Every Sector It Serves
Firearms are devastating, but they represent a fraction of daily safety incidents. Here is what Omnilert cannot detect in every industry it claims to serve — and what IntelliSee catches from the same cameras.
Education
Omnilert CatchesVisible firearmsOmnilert MissesAfter-hours unauthorized campus access, student falls in hallways, loitering near restricted areas, perimeter breaches at entry points, crowd surges at events, slip hazards during weather
Healthcare
Omnilert CatchesVisible firearmsOmnilert MissesPatient falls (the #1 hospital safety incident), slip hazards on wet surfaces, unauthorized access to restricted wards, loitering in parking structures, perimeter control at ED entries
Manufacturing
Omnilert CatchesVisible firearmsOmnilert MissesWorker falls and injuries, slip-risk spills on production floors, unauthorized zone entry, vehicle detection in loading zones, smoke and fire detection, cell phone use in restricted areas
Houses of Worship
Omnilert CatchesVisible firearmsOmnilert MissesAfter-hours intrusion detection, loitering around buildings between services, parking lot perimeter breaches, crowd density during high-attendance events, falls among elderly congregants
Senior Living
Omnilert CatchesVisible firearmsOmnilert MissesResident falls (the single highest-frequency safety event), elopement through restricted exits, slip hazards in hallways and bathrooms, unauthorized visitor access, loitering in parking areas
Stadiums & Venues
Omnilert CatchesVisible firearmsOmnilert MissesCrowd density and surge detection, slip-and-fall on concourse surfaces, unauthorized backstage access, vehicle detection in controlled zones, perimeter breach at gates and fencing
Total Cost of Protection
The Vendor Sprawl Problem
Choosing Omnilert means choosing a gun-only platform. Every other safety threat your organization faces — falls, slip hazards, unauthorized access, perimeter breaches, crowd control — requires a separate vendor, a separate contract, a separate dashboard, and a separate integration.
Contracts
1 vs. Many
IntelliSee includes all 11+ detections under one contract. With Omnilert, covering falls alone requires a second vendor. Add slip detection, perimeter control, and vehicle monitoring and you are managing four or five separate agreements.
Dashboards
1 vs. Many
IntelliSee surfaces every alert type in a single secure dashboard. When your security team juggles separate interfaces for guns, falls, access, and perimeter events, response time degrades and training complexity multiplies.
Upgrades
Included
IntelliSee adds new detection capabilities through model updates at no additional cost. With Omnilert, new capabilities mean new products, new purchases, and new integrations. Their platform has one detection type and it always will.
Switch & Save
Switching from Omnilert to IntelliSee
If your cameras work with Omnilert, they work with IntelliSee. The migration is non-disruptive and can be completed quickly. You keep your gun detection capability and gain 10+ additional threat categories at one price.
01
Connect Your Cameras
IntelliSee works with ONVIF and RTSP protocols. Point your existing camera streams at the IntelliSee appliance. No camera replacement, no network redesign.
02
Enable All Detections
Activate weapon detection plus falls, unauthorized access, slip risks, loitering, crowds, vehicles, smoke, perimeter breaches, and more from a single dashboard.
03
Consolidate Your Stack
Eliminate the separate vendors, contracts, and dashboards you needed alongside Omnilert. One platform covers every threat category your facility faces.
Beyond Gun Detection
What Omnilert Cannot See
Omnilert watches for one threat. IntelliSee watches for everything. These are real detections from the IntelliSee platform — threat types that Omnilert’s gun-only architecture will never cover.
Hazard Prevention
Slip Risk Detection
Spills, wet surfaces, and environmental slip hazards detected before they cause injuries and liability claims. Omnilert cannot detect any non-firearm threat.
Life Safety
Fall Detection
Immediate identification of fallen individuals in hospitals, senior living, and commercial facilities. The #1 hospital safety incident — invisible to Omnilert.
Active Threat
Weapon Detection
Both platforms detect firearms. But IntelliSee delivers automated alerts in seconds with no human bottleneck — plus 10 additional threat types at the same price.
Intelligence Brief
The Notification Company Problem
Omnilert was built to send messages. Their platform was designed in 2004 to blast emergency notifications through text, email, phone, and PA systems. Two decades later, they layered AI gun detection on top of that notification engine. Their entire architecture is optimized for one thing: sending alerts after a human confirms a gun. Their AI serves as a trigger mechanism for a notification system — not a comprehensive threat intelligence platform.
IntelliSee was never a notification company. It was built from the ground up as a computer vision platform, engineered to see, classify, and alert on the full spectrum of physical security threats. Gun detection is one of eleven-plus capabilities — not the only one. All video processing occurs on a secure, on-premises 1U rack appliance. No video leaves your building. No facial recognition. No biometric data. No PII storage.
IntelliSee carries DHS SAFETY Act QATT designation and is built entirely on U.S.-based hardware, software, and support. The platform satisfies BIPA, GDPR, and state-level biometric privacy requirements while delivering the detection accuracy that facilities demand.
FAQ
Common Questions
What is the difference between IntelliSee and Omnilert?
IntelliSee is a multi-threat AI security platform that detects weapons, falls, unauthorized access, crowds, loitering, vehicles, slip hazards, smoke, cell phones, and perimeter breaches from existing cameras. Omnilert detects only firearms and routes every alert through a human operations center before notifying your team. IntelliSee delivers automated real-time alerts across 11+ threat categories. Omnilert covers one.
Does Omnilert detect anything other than guns?
No. Omnilert is a firearm-only detection platform built on top of an emergency mass notification system originally launched in 2004. It cannot detect falls, slip hazards, unauthorized access, loitering, crowds, vehicles in restricted zones, smoke, fire, cell phones, or any non-weapon threat. Organizations using Omnilert must purchase and manage separate systems for every other safety risk.
Do both platforms work with existing cameras?
Yes. Both IntelliSee and Omnilert connect to existing IP security cameras and both use on-premise appliances for local video processing. Neither requires camera replacement. The critical difference is what each platform does with those camera feeds — IntelliSee analyzes them for 11+ threat types while Omnilert analyzes them for firearms only.
How fast are Omnilert alerts compared to IntelliSee?
IntelliSee delivers automated alerts in seconds using multi-frame AI validation with no human bottleneck. Omnilert routes every detection through a human operations center where trained operators must manually verify each alert before any notification is sent to your team. Per the DHS SAFETY Act listing, Omnilert alerts are “verified by Seller-trained individuals.” This human-in-the-loop verification adds latency to every alert.
Is Omnilert a gun detection company or a notification company?
Omnilert was founded in 2004 as an emergency mass notification platform. It later added AI gun detection as a product extension approximately two decades later. Their core architecture is built around sending messages — gun detection serves as a trigger for that messaging system. IntelliSee was purpose-built from the ground up as a multi-threat computer vision security platform for real-time, autonomous threat detection.
How do the DHS designations compare?
IntelliSee holds DHS QATT (Qualified Anti-Terrorism Technology) designation. Omnilert received full DHS SAFETY Act Designation in March 2025. Both are evaluated by the Department of Homeland Security. QATT is the foundational recognition under the SAFETY Act. Full Designation is an elevated standard that adds liability protections for deploying organizations. Both designations validate the technology for anti-terrorism applications.
Can I switch from Omnilert to IntelliSee?
Yes. IntelliSee connects to existing ONVIF and RTSP cameras. If your cameras work with Omnilert, they work with IntelliSee. Migration is non-disruptive, can be completed quickly, and gives you 10+ additional detection capabilities at one price from the same camera infrastructure.
Which platform is better for healthcare facilities?
Healthcare facilities face safety threats that extend far beyond firearms. Patient falls are the single highest-frequency safety incident in hospitals. Slip hazards, unauthorized ward access, and loitering in parking structures happen daily. IntelliSee addresses all of these from a single platform. Omnilert addresses only the firearm component, leaving the most common safety incidents completely unmonitored.
Does Omnilert’s native mass notification give it an advantage?
Omnilert’s built-in mass notification system is a legitimate capability. However, most organizations already have emergency notification infrastructure in place. IntelliSee integrates with existing notification systems — including Singlewire and AtlasIED — rather than requiring adoption of a new one. The relevant question is not which platform sends better alerts, but which platform detects more threats worth alerting about.
Does either platform use facial recognition?
Neither IntelliSee nor Omnilert uses facial recognition. Both platforms detect threats without identifying individuals by face. IntelliSee additionally collects no biometric data, stores no video footage, and processes all data on-premises within your network perimeter. No video ever leaves your building.
Next Step
See Full-Spectrum Detection for Yourself
Request a side-by-side comparison with your existing cameras. See what IntelliSee detects that Omnilert cannot — and why organizations are choosing comprehensive protection over single-threat coverage.
